Skipper Bollard Tape Receiver And Adapter Valley Craft 5-inch centers Arm Tilt Approximately

5-inch centers Arm Tilt Approximately 5 degrees upward End Stops May be mounted up or flush Single-Sided Configuration 14 arms

and trilingual warning label

Environmentally-friendly

Valley Craft's Drum Grip Attachment for Steel Universal Lifts & Stackers

*** Due to their unique configuration

Skipper Bollard Tape Receiver And Adapter Valley Craft 5-inch centers Arm Tilt ApproximatelyProduct Overview The Skipper Bollard Tape Receiver and Adapter mounts a Skipper XS Unit to compatible steel or polymer bollards and provides a multi directional tape receiver at the opposite point. Two attachment styles are available: screw on and magnetic. The screw on installation requires four pre drilled 3 mm holes. The adapter is designed for bollards at least 3 in. in diameter, and two mounting points can be positioned up to 30 ft. (9 m) apart