Rob Cosman's Joinery Crosscut Saw: 3/4 Size Rate Set at 1.4048 Primary bevel is ground to

Primary bevel is ground to 30°

but they can be purchased from Donegan Optical

Radius tip “track’s” in the end grain

0 adjusting knob to replace the original adjusting knob on most Lie Nielsen bench planes

The vise has 5-3/4 inches of travel between the jaw face and the workbench

Rob Cosman's Joinery Crosscut Saw: 3/4 Size Rate Set at 1.4048 Primary bevel is ground toCutting crosscuts in very small stock, can be challenging with our regular sized Joinery Crosscut saw. It can be done, but I wanted a better saw for this application. That is why I designed my 3 4 Joinery Crosscut saw. As compared to my regular sized Joinery Crosscut, the 3 4 Joinery Crosscut Saw has a thinner saw plate, smaller teeth, shallower depth of cut, and shorter overall length, which makes delicate crosscuts a breeze. My 3 4 Joinery Crosscut