Czech Glass 3 x 10mm Dagger Beads - Bronze (1 Strand) liq-popular Measurements:19mm long from top of

Measurements:19mm long from top of hook to end

Will cover 3x3 crimps or smaller (after the beads have been crimped)

Also known as diagonal cutters

Color: Luster Metallic Amethyst Jet

Measurements: Each link is approximately 1

Czech Glass 3 x 10mm Dagger Beads - Bronze (1 Strand) liq-popular Measurements:19mm long from top ofCzech pressed glass beads are manufactured by heating a rod of glass until molten and pressing into molds where it is stamped and holes are pierced. The beads are then rolled in hot sand to soften seam lines and remove flashing. These dagger shaped beads are side drilled at the top and will look great on necklaces and bracelets. Color: Bronze Measurements: 10mm long, 3mm wide, 3mm thick. The holes will accommodate thread or wire up to 22 gauge (. 025"